660.341.1453 [email protected]
Oldham Auctions LLC

[email protected]

April 2 at Odessa, MO
Oldham Consignment Auction
April 9 at Bates City, MO
Bates City Tractor Liquidation
April 11 at Odessa, MO
Oldham Consignment Auction

AUCTION ALREADY COMPLETED!

Oldham Auctions LLC - Odessa, MO 64076

Bradley On-Line Estate Auction

Personal Property, Farm Machinery, Construction Equipment

Location: 17008 E. RD Mize Rd, Independence, MO

7 p.m. Wednesday, May 31st, 2023
E-350 Motor Home, White Forklift, Project Tractors, Trailer & Tow Dolly, Implements, Shop Equipment & Tools, Welders, Machinist Tools, Auto Parts, And Much More!!!
CLICK HERE to bid now online

Click on thumbnails to see larger photos and descriptions
Photo #1 Photo #2 Photo #3 Photo #4 Photo #5 Photo #6 Photo #7 Photo #8

ON-LINE ESTATE AUCTION

Wednesday, May 31st

Visit www.oldhamauctions.com

1995 E350 Coachman Leprechaun Motor Home

#2 • 1995 E350 Coachman Leprechaun Motor Home

= Year: 1995 = Make: Ford = Model: Econoline = Vehicle Type: Van = Mileage: Shows 85,548 = Body Type: RV Cutaway = Trim Level: Base = Drive Line: RWD = Engine Type: V8, 7.5L (460 CID) = Fuel Type: Gasoline = Transmission: Automatic = VIN #: 1fdke30g7sha76811 = Sells w/Clear Title Notes: This 1 Owner Motor Home Runs And Drives, And We're Told Its Ready To Go Camping Other Than The Seller Says The Generator Won't Start, And They Couldn't Get The Refrigerator To Switch To Electric From Gas (it works fine with gas). It Has Air Assisted Suspension, 55 Gallon Gas Tank, 40 Amp Power Inverter, Spare Tire Kit, A/C, Jacks, Towing Hitch, Jack Knife Sofa, Reclining Pilot Seat, Refrigerator, 3 Burner Range, 6 Gallon Water Heater, Dinette W/Storage, Raised Floor, Exterior Slide Drawers & Microwave, And To Many Accessories To Name. Fully Stocked With Towels To Toasters (Notice Photos). Come To The Preview and Check It Out. The RV and Title Will Not Be Allowed To Leave The Property Until Funds Clear Our.
Notes
White 244 FL Rough Terrain  Fork Lift

#3 • White 244 FL Rough Terrain Fork Lift

= Starts, Drives, & Lifts Good = Model 515-71008 = Serial 226-989-483 = 2 Stage Mast = 2WD = Good Tires = Leaks A Little Hydraulic Fluid The Forklift Will Not Be Allowed To Leave The Property Until Funds Clear Our
Notes
Oliver 550 Tractor

#4 • Oliver 550 Tractor

= Was Being Restored And Has Lots Of New Parts = Not Running = Model 65-21039 = Serial 190-644-019 = 3 Point = 540 PTO = Converted To 12 Volt = New Starter = New Alternator = New Gauges = Good Tire = Pallet Of Parts Is Included (Notice Photos) = Come To The Preview and Make Your Own Determination Of What It Will Take To Get It Running. The Tractor Will Not Be Allowed To Leave The Property Until Funds Clear Our Account
Notes
Oliver 1750 Tractor

#5 • Oliver 1750 Tractor

= Not Running = 3 Point = 540 PTO = Shows 4084 Hours = Decent Tires = Includes Pallet Of Parts = Unknown Year = This Is A Project Tractor and Will Need Some Mechanical Work To Get Running, Come To The Preview and Make Your Own Determination.
Notes
1957 John Deere 420 Tractor w/Front Loader

#6 • 1957 John Deere 420 Tractor w/Front Loader

= Not Running = Model 420 S = Serial 108554 = John Deere 35 Front Loader = 3 Point = Diesel = Good Back Tires = 2 Wheel Drive = No Hour Meter = This Is A Project Tractor and Will Need Some Mechanical Work To Get Running, Come To The Preview and Make Your Own Determination.
Notes
GMC Flatbed Truck

#7 • GMC Flatbed Truck

= No Title, Parts Only Truck = Split Windshield = Tommy Lift Gate = Floor Board Is Rusted Out = 84" x 110" Flat Bed = Has Been Sitting Long Time All Tires Are Flat
Notes
20' x 8' Flatbed Trailer w/4' Dovetail

#8 • 20' x 8' Flatbed Trailer w/4' Dovetail

= 20' x 8' = Triple Axles = Good Tires = 24" Removable Sides = Thread Plate Deck = 9' x 7' Heavy Duty Ramp /Tailgate = 2-5/16" Ball = 7 Pin Trailer Hook Up = LED Tail Lights = Sells With Clear Title The Trailer and Title Will Not Be Allowed To Leave The Property Until Funds Clear Our Account
Notes
Load Star Tow Dolly

#9 • Load Star Tow Dolly

= 79" inside Fenders = 100" Wide To Outside Of Fenders = Good Tires
Notes
Westendorf Hydraulic Front Loader  w/Bucket

#10 • Westendorf Hydraulic Front Loader w/Bucket

= 7’ Bucket = Includes Hydraulic Hoses And More ( Notice Photos)
Notes
Front Loader  w/Bucket

#11 • Front Loader w/Bucket

= 34 1/2” Bucket
Notes
Oliver 3 Bottom/Disc Plow

#12 • Oliver 3 Bottom/Disc Plow

= 3 Pt. = Serial 1878
Notes
Dearborn 2 Bottom/Disc  Plow

#13 • Dearborn 2 Bottom/Disc Plow

= 3 Pt. = Model 1C 158 = Serial 2343
Notes
New Holland 450 Sickle Mower

#14 • New Holland 450 Sickle Mower

= Serial 18695 = 7’ Blade = 3 Pt.
Notes
3Pt. Carry All

#15 • 3Pt. Carry All

= 6’ x 33”
Notes
Oliver Tractor Cab

#16 • Oliver Tractor Cab

= 64” Tall = 76” Wide = 50” L
Notes
Empire Sickle Mower

#17 • Empire Sickle Mower

= Wheels Are 26” Diameter
Notes
Ferguson Disc

#18 • Ferguson Disc

= 3 Pt = Modes PAO22 = Serial 002100
Notes
John Deere Cultivator

#19 • John Deere Cultivator

= Not Sure If It Is Complete
Notes
3 Pt. Scoop

#20 • 3 Pt. Scoop

= 3’ x 38”
Notes
Fork Hitch

#21 • Fork Hitch

= 24" Wide
Notes
Drawtite Gooseneck Hitch

#22 • Drawtite Gooseneck Hitch

= 4’ Wide = 2-5/16” Ball Mount
Notes
New Chrome Tread Plated Trailer Fenders

#23 • New Chrome Tread Plated Trailer Fenders

= 6’ Long = 10” Wide = Like New
Notes
New Chrome Tread Plate Trailer Fenders

#24 • New Chrome Tread Plate Trailer Fenders

= 6’ Long = 10” Wide = Like New
Notes
Tractor/Loader Forks

#25 • Tractor/Loader Forks

= 37” Long
Notes
Fork Lift Forks

#26 • Fork Lift Forks

= 4’ Long
Notes
Tractor/Loader Forks

#27 • Tractor/Loader Forks

= 49”Long
Notes
Torch Tank Trailer

#28 • Torch Tank Trailer

= 11” Diameter
Notes
Receiver

#29 • Receiver

= 20” Wide
Notes
Steel Sawhorses

#30 • Steel Sawhorses

= 24” L x 16” Tall
Notes
Woven Wire Fencing

#31 • Woven Wire Fencing

= 4’ Tall
Notes
Barbed Wire

#32 • Barbed Wire

= 12-1/2 Ga. = 4 Point
Notes
Barbed Wire

#33 • Barbed Wire

= 4 Point
Notes
Trinco Dry Sand Blast Cabinet

#34 • Trinco Dry Sand Blast Cabinet

= Model 30/PP
Notes
Speedaire Cast Iron Series 200 PSI Air Compressor

#35 • Speedaire Cast Iron Series 200 PSI Air Compressor

= Model 5F565 7.5 HP = 3 Phase = 30 Gallon = 260/460 Volt = Not Tested
Notes
Acetylene & Oxygen Cutting Torch

#36 • Acetylene & Oxygen Cutting Torch

= Large Cylinders With Lids = Hoses = Victor Regulator = Smith Torch = Chains Included
Notes
Concrete Mixer

#37 • Concrete Mixer

= Electric = Working Condition
Notes
Miller Big Blue 400D Constant Current Welder

#38 • Miller Big Blue 400D Constant Current Welder

= Diesel Powered = 230 Volt = Seller Says This Is A Working Welder = Hour Meter Not Working
Notes
Miller Big Blue 400 D Constant Current Welder

#39 • Miller Big Blue 400 D Constant Current Welder

= Non Working = Diesel Powered = Shows 4,096 Hours = 120/240 Volt = We're Told That It Most Likely Has Broken Crank = Not Tested
Notes
Lincoln Arc Welder

#40 • Lincoln Arc Welder

= Model SA-200F-163 = 115 Volt DC Power = Seller Says It Is A Working Welder = Needs Battery
Notes
Miller Wildcat 350

#41 • Miller Wildcat 350

= Diesel Powered = 260/460 Volt = Shows 3062 Hours = Seller Says It Runs And Welds Okay But Has Bad Tail Bearing
Notes
Miller Big 40 Arc Welder

#42 • Miller Big 40 Arc Welder

= Stock # 900-955 = 230/460 Volt = Diesel Powered = Seller Says It Welds Okay But Has A Burnt Valve In Engine = Shows 2384 Hours
Notes
Lincoln R3S400 Arc Welder

#43 • Lincoln R3S400 Arc Welder

= Non Working = Idealarc R3S = Model R3S400 = 230/460 Volt
Notes
Miller Welder w/Wire Feeder

#44 • Miller Welder w/Wire Feeder

= Non Working = Model CP 250TS = Wire Feeder
Notes
Airomatic Welder

#45 • Airomatic Welder

= Parts Only Non Working = 230/460 Volt
Notes
Lincoln Arc Welder

#46 • Lincoln Arc Welder

= Non Working = Model 250-250 = 230/460 Volt
Notes
Lincoln Arc Welder

#47 • Lincoln Arc Welder

= Non Working = Model 250-250 = 230/460 Volt
Notes
Hobart Wire Feeder

#48 • Hobart Wire Feeder

= Not Tested
Notes
Lincoln Wire Feeder

#49 • Lincoln Wire Feeder

= Model LN-25 = Semi Auto = Not Tested
Notes
Millermatic Wire Feeder

#50 • Millermatic Wire Feeder

= Model S-32S = Not Tested
Notes
Lincoln Squirt Welder

#51 • Lincoln Squirt Welder

= Wire Feeder = Not tested
Notes
Doall Band Saw 

#52 • Doall Band Saw 

= Working Condition = Includes Manual = Model S-F-P = Serial 27-52636 = 115/220 Volt
Notes
Commercial Craftsman Drill Press

#53 • Commercial Craftsman Drill Press

= Tapamatic Attachment = Working Condition
Notes
Craftsman 150 Drill Press

#54 • Craftsman 150 Drill Press

= Includes Chucks = Working Condition
Notes
Heavy Duty Grinder/Wire WHEEL

#55 • Heavy Duty Grinder/Wire WHEEL

= 7” Wheels On Stand = Working Condition
Notes
Craftsman Grinder

#56 • Craftsman Grinder

= 6” On Stand = Working Condition
Notes
Westward Portable Sand Blaster

#57 • Westward Portable Sand Blaster

= 90 Lbs. = 125 PSI
Notes
Craftsman Heavy Duty Grinder

#58 • Craftsman Heavy Duty Grinder

= 3/4 HP = 8” Wheel = 115/230 Volt = Working Condition
Notes
Trenton Anvil

#59 • Trenton Anvil

= Good Shape = Believe To Be 125 Lbs.
Notes
Steel Welding Table

#60 • Steel Welding Table

= 72” L x 48” W x 22.5” T = Steel Casters 12” Diameter
Notes
Steel Welding Table

#61 • Steel Welding Table

= On Steel Casters = 5’ L x 32” W x 35” T
Notes
Heavy Steel Cabinet/Welding Table

#62 • Heavy Steel Cabinet/Welding Table

= Thick Steel Plate 4" Thick = Contents Included = 72" L x 48" W x 35" T
Notes
Steel Cabinet

#63 • Steel Cabinet

= On Casters = 60” L x 30” W x 66” T = Includes Contents
Notes
Steel Job Box

#64 • Steel Job Box

= 61” L x 31” W x 55” T = Includes Content = Large Casters
Notes
Delta Job Box

#65 • Delta Job Box

= 5’ L x 30” W x 43” T = Large Casters = Includes Contents
Notes
Heavy Duty Steel Square Shelf

#66 • Heavy Duty Steel Square Shelf

4’ L x 2 8” W x 53” T
Notes
Steel Shelves

#67 • Steel Shelves

= With Drawers = 6’ L x 18” W x 49” T = On Casters
Notes
Yale Gantry

#68 • Yale Gantry

= 3 I beams @ 82" x 5" = Trolley = Not Sure If Complete = Wood And Conduit Included
Notes
Kennedy Roller Cabinet & Mechanics Chest

#69 • Kennedy Roller Cabinet & Mechanics Chest

= No. 526 = 29” L x 20” W x 58” T = 15 Drawers
Notes
Kennedy Roller Cabinet & Mechanics Chest

#70 • Kennedy Roller Cabinet & Mechanics Chest

= 29” L x 20” W x 58” T = 12 Drawers
Notes
Kennedy Roller Cabinet & Mechanics Chest

#71 • Kennedy Roller Cabinet & Mechanics Chest

= 27” L x 18” W x 4’T = 13 Drawers
Notes
Kennedy Roller Cabinet & Mechanics Chest

#72 • Kennedy Roller Cabinet & Mechanics Chest

= 13 Drawers = 27” L x 18” W x 4’T
Notes
Metal Organizer

#73 • Metal Organizer

= Includes Contents = 17” L x 23” W x 42” T
Notes
Steel Cart

#74 • Steel Cart

= 24” x 24” x 27” T = Steel Casters
Notes
Nut & Bolt Bins

#75 • Nut & Bolt Bins

= Steel Frame = Includes All Contents = 66" L x 20" W x 51" T
Notes
Rotating Hardware Bins

#76 • Rotating Hardware Bins

= 27” Tall
Notes
Durham Organizer

#77 • Durham Organizer

= Model DL24C = 20” L x 16”” W x 15” T
Notes
Metal Organizer

#78 • Metal Organizer

= 15” L x 7” W x 8” T
Notes
Machinist Tool Box

#79 • Machinist Tool Box

= Missing One Drawer
Notes
Hardware Organizer

#80 • Hardware Organizer

= Contents Included
Notes
5 Drawer Tooling Organizer

#81 • 5 Drawer Tooling Organizer

= Model 5-D- 326374 = Carbide Turning Tool Set = Drill Bits = Metal Lathe Carbide Tipped Cutter Tools
Notes
Hardware Organizer

#82 • Hardware Organizer

= Includes Contents
Notes
Metal Cabinet

#83 • Metal Cabinet

= 36” L x 18” W x 72” T = Contents Not Included
Notes
Metal Cabinet

#84 • Metal Cabinet

= 3’L x 18” W x 6’ T
Notes
Heavy Duty Steel Ramps

#85 • Heavy Duty Steel Ramps

= 7’ Long = 21” Wide
Notes
Heavy Duty Steel Ramps

#86 • Heavy Duty Steel Ramps

= 66” x 21”
Notes
Heavy Duty Steel Ramps

#87 • Heavy Duty Steel Ramps

= 21' x 64"
Notes
Aluminum Ramps & Conveyor Roller

#88 • Aluminum Ramps & Conveyor Roller

= 4 Total = 3 @ 13 ' Long = One @ 14' Long = 1 Conveyor Roller 10' Long
Notes
Ramsey 9500 Patriot Winch

#89 • Ramsey 9500 Patriot Winch

= Steel Mount = No Controller
Notes
Delta Truck Toolbox

#90 • Delta Truck Toolbox

= Like New With Keys = Includes Contents
Notes
New Drum Fan

#91 • New Drum Fan

= 20” ​​​​​​​= Working Condition
Notes
New Drum Fan

#92 • New Drum Fan

= 12” = Working Condition
Notes
New Drum Fan

#93 • New Drum Fan

= 12” ​​​​​​​= Working Condition
Notes
Industrial Fan

#94 • Industrial Fan

= 24" Diameter
Notes
Fan

#95 • Fan

= No Motor = 34” x 34”
Notes
Dayton Motorized Damper

#96 • Dayton Motorized Damper

= 23” x 20” = 32” x 32”
Notes
Whitco Diesel High Pressure Steam Cleaner

#97 • Whitco Diesel High Pressure Steam Cleaner

= Model EHA = Hoses And Wand Included = Not Running
Notes
Steel Plates

#98 • Steel Plates

= Approximately 8 Sheets 10’-8’ Long x 4’ Wide = Includes 5 Sheets Of Plywood 4' x 8' x 1/2” Thick
Notes
Industrial Ground Fault Cable Retractor

#99 • Industrial Ground Fault Cable Retractor

= Not Sure If Complete
Notes
Yuasa Rotary Tool

#100 • Yuasa Rotary Tool

= Stock 550-052
Notes
Pipe Beveling Machine

#101 • Pipe Beveling Machine

= No. SG26366H8
Notes
Lathe Chuck

#102 • Lathe Chuck

= 14” Diameter
Notes
Lathe Chuck

#103 • Lathe Chuck

= 12” Diameter
Notes
Lathe Chuck

#104 • Lathe Chuck

= 12” Diameter
Notes
Armstrong Tool Post

#105 • Armstrong Tool Post

= Four Way
Notes
Tool Post

#106 • Tool Post

= 4 Way
Notes
Tool Post

#107 • Tool Post

= Arbors And More
Notes
Tool Post

#108 • Tool Post

= Four Way
Notes
Precision Vises

#109 • Precision Vises

= 7” & 3.5”
Notes
Precision  Vise

#110 • Precision Vise

= 9”
Notes
 Brown & Sharp Magnetic Chuck

#111 • Brown & Sharp Magnetic Chuck

= No.618
Notes
Precision  Vises

#112 • Precision Vises

= 2”
Notes
3-1/2” Bench Vise

#113 • 3-1/2” Bench Vise

= 4” Precision Vise
Notes
Volcan No.3 Pipe Vise

#114 • Volcan No.3 Pipe Vise

= 4” = Precision Machine Vise
Notes
Monarch 4”:Vise

#115 • Monarch 4”:Vise

= Vise Has Broken Handle = Heavy Cast Iron Wheel = 12” Diameter Wheels
Notes
All One Money

#116 • All One Money

= Cutters = Tool Holders = Wood Drawer
Notes
Metal Lathe Chucks & Cutters

#117 • Metal Lathe Chucks & Cutters

= Nuts And Bolts = Metal Lathe Cutter Tool Bits
Notes
Dividing Head

#118 • Dividing Head

= Tail Stocks = End Mill And More = Includes Crate
Notes
Tapmatic 90x Reversible Tapping Attachment

#119 • Tapmatic 90x Reversible Tapping Attachment

= Vise = Pulleys And More
Notes
Cable Hoists

#120 • Cable Hoists

= Aluminum
Notes
Hi-Lift Jack

#121 • Hi-Lift Jack

= Working Condition
Notes
Trailer Jack And Mounts

#122 • Trailer Jack And Mounts

= 2-5/16” To 2” Ball Mounts
Notes
Receivers

#123 • Receivers

= Clevis Hitch
Notes
Trailer Mounts

#124 • Trailer Mounts

= Trailer Jack
Notes
Metal Lathe Parts

#125 • Metal Lathe Parts

= Dies = Arbors And More
Notes
Boring Tools

#126 • Boring Tools

= Aluminum Groove Holders = Toolbox = Steel Bins Included
Notes
Sealmaster

#127 • Sealmaster

= Casters
Notes
Jack Stand

#128 • Jack Stand

= 50” Tall
Notes
Stacker Jacks

#129 • Stacker Jacks

= 8 Total
Notes
Bottle Jacks

#130 • Bottle Jacks

= Largest One Believe Is 6 Ton Jack
Notes
60’ Heavy Duty Hoist  Chain

#131 • 60’ Heavy Duty Hoist Chain

= One Piece
Notes
Chain  & Pulley

#132 • Chain & Pulley

= Large Hook
Notes
Chain Assortment

#133 • Chain Assortment

= 6’
Notes
Tie Down Chains

#134 • Tie Down Chains

= D Rings = 6’ Long
Notes
1-1/2 Ton Coffee Hoist

#135 • 1-1/2 Ton Coffee Hoist

= Chain = Trailer Jack Handle
Notes
Hilco Universal Cutter Grinder

#136 • Hilco Universal Cutter Grinder

= Model 2
Notes
Ratchet Straps

#137 • Ratchet Straps

= Various Sizes
Notes
Draw Pins

#138 • Draw Pins

= Hairpins And More
Notes
Connector Sets

#139 • Connector Sets

= Hinges
Notes
Large Tap Wrench

#140 • Large Tap Wrench

= 39" Long
Notes
Metal Lathe Cutter Tool Bits

#141 • Metal Lathe Cutter Tool Bits

= Includes Metal Drawers
Notes
Tool,Holders

#142 • Tool,Holders

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#143 • Metal Lathe Cutter Tool Bits

= Carbide Turning Tool Set
Notes
Carbine Tipped Annular Cutters

#144 • Carbine Tipped Annular Cutters

= Reamers = Hole Saw
Notes
Metal Side Cutters

#145 • Metal Side Cutters

= Illinois And Standard Tool = Niagara & Cleveland
Notes
Metal Side Cutters

#146 • Metal Side Cutters

= Illinois And Standard Tool = Niagara & Cleveland
Notes
Bander Tool

#147 • Bander Tool

= With Clips
Notes
Williams Cutting Off & Slide Tool

#148 • Williams Cutting Off & Slide Tool

= No.31-L = Chucks = Drill Bits
Notes
Reamers & Cutting Tools Morse

#149 • Reamers & Cutting Tools Morse

= F & D = Chucking Reamers = LaVallee = Shank Drill = Drill Bits
Notes
Precise High Speed T-Slot Cutters

#150 • Precise High Speed T-Slot Cutters

= Keyseat Cutters
Notes
APT Slot Master

#151 • APT Slot Master

= High Speed Side Cutters
Notes
Cut Off Wheels

#152 • Cut Off Wheels

= Wire Wheels = Various Sizes = New And Used
Notes
High Speed Cutters

#153 • High Speed Cutters

= Tap And Die & Much More = Includes Crate
Notes
Heavy Duty Safety Swich Boxes

#154 • Heavy Duty Safety Swich Boxes

= Cable Coil = 220 Volt Adapters = Cable Clip Kits
Notes
All Thread

#155 • All Thread

= 5’ To 2’
Notes
Jacks

#156 • Jacks

= Large Hooks = Hose Reel = Square Tube
Notes
Armco Cap Scews

#157 • Armco Cap Scews

= See Photos For Sizes
Notes
Nuts & Bolts

#158 • Nuts & Bolts

= Screw Anchors And More
Notes
Tractor Wheels

#159 • Tractor Wheels

= 30” Diameter = Would Make Good Fire Rings
Notes
Yale Chain Hoists(2)

#160 • Yale Chain Hoists(2)

= Model B-B
Notes
Jacobs Drill Chucks

#161 • Jacobs Drill Chucks

= 3/16-3/4” = No. 34 & 36
Notes
Jacobs Drill Chucks

#162 • Jacobs Drill Chucks

= No. 14N 0-1/2” = No. 36 3/16-3/4” = No. 18N 1/8-3/4”
Notes
Live Center  Morse Tapers

#163 • Live Center Morse Tapers

= Various Sizes
Notes
Metal Lathe Cutter Tool Bits

#164 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#165 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#166 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#167 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#168 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#169 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#170 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Metal Lathe Cutter Tool Bits

#171 • Metal Lathe Cutter Tool Bits

= Various Brands And Sizes
Notes
Reamers & Collets

#172 • Reamers & Collets

= Retaining Rings
Notes
Drill Bit Assortment

#173 • Drill Bit Assortment

= High Speed
Notes
Hex Keys

#174 • Hex Keys

= SAE & Metric = Protractors
Notes
Drill Bits

#175 • Drill Bits

= Large Lot
Notes
Taper Shank Adapters

#176 • Taper Shank Adapters

= Drill Chuck Arbors = Varius Brands And Sizes
Notes
Combined Drill & Countersinks

#177 • Combined Drill & Countersinks

= Drill Bits, End Mills & Taps
Notes
Nicholson Files

#178 • Nicholson Files

= Bastard
Notes
R & N Taps

#179 • R & N Taps

= Straight Flute Reamers = Pratt & Whitney
Notes
End Mills

#180 • End Mills

= Various Sizes
Notes
Pilot Reamers

#181 • Pilot Reamers

= Chuck Jaws
Notes
Hex Keys & Socket Key Sets

#182 • Hex Keys & Socket Key Sets

= SAE & Metric
Notes
Pilot Reamers

#183 • Pilot Reamers

= Adjustable Hand Reamers
Notes
Taper Drill Bits

#184 • Taper Drill Bits

= Various Sizes
Notes
Large Drill Bits

#185 • Large Drill Bits

= Largest Is 2”
Notes
Large Tool Holders

#186 • Large Tool Holders

= Various Sizes
Notes
Chisels

#187 • Chisels

= Proto And Dasco = Craftsman
Notes
Tool Holders

#188 • Tool Holders

= Various Sizes
Notes
Drill Bits

#189 • Drill Bits

= Various Sizes
Notes
Drill Bits

#190 • Drill Bits

= Various Sizes
Notes
Large Drill Bits

#191 • Large Drill Bits

= Various Sizes
Notes
Large Drill Bits

#192 • Large Drill Bits

= Various Sizes
Notes
Reamers & Drill Bits

#193 • Reamers & Drill Bits

= Various Sizes
Notes
Boring Heads

#194 • Boring Heads

= Protractors, Files And Drill Bits
Notes
Threadwells Die Set

#195 • Threadwells Die Set

= Hassey-Savage
Notes
Machinist Milling Hold Down Clamps

#196 • Machinist Milling Hold Down Clamps

= Various Sizes
Notes
Pipe Vise

#197 • Pipe Vise

= Hammers = Gear Puller And More
Notes
Files

#198 • Files

= C-Clamps
Notes
Spade Drill Tool Cutters

#199 • Spade Drill Tool Cutters

= Drill Bits
Notes
Files

#200 • Files

= Double Sided Flutes = High Speed Drill Bits
Notes
Punches

#201 • Punches

= Files = Hex Keys And More
Notes
Drill Bits

#202 • Drill Bits

= Masonry Bits = High Speed Bits = Craftsman Hex Keys
Notes
Taps & Die

#203 • Taps & Die

= Various Sizes
Notes
Taps

#204 • Taps

= Hex Keys & Drill Bits
Notes
Taps

#205 • Taps

= Various Sizes
Notes
Reamers & Taps

#206 • Reamers & Taps

= Flutes = Protractor = Reamers = Varius Sizes
Notes
Reamers

#207 • Reamers

= Drill Bits
Notes
End Mills

#208 • End Mills

= Various Sizes
Notes
End Mills

#209 • End Mills

= Taps = Extension Socket With MS Hole
Notes
Mill Bastard Files

#210 • Mill Bastard Files

= Pry Bar And.More
Notes
Machinist Hold Down Clamps

#211 • Machinist Hold Down Clamps

= Includes Bin
Notes
Chisels

#212 • Chisels

= Various Sizes
Notes
Hole Saws

#213 • Hole Saws

= Starrett & Craftsman
Notes
Large Lot Of Inserts

#214 • Large Lot Of Inserts

= Various Sizes
Notes
Antique Tools

#215 • Antique Tools

= Rare Hand Drill = C-Clamp = Wrenches And More
Notes
L.S.Starrett  Machinist Tools

#216 • L.S.Starrett Machinist Tools

= Micrometers = Combo Square Protractor = No. 436 = No.450
Notes
L.S.Starrett  Machinist Tools

#217 • L.S.Starrett Machinist Tools

= Mitutoyo = Parallel Bars = Micrometer = Calipers
Notes
L. S. Starrett Gages & Micrometer

#218 • L. S. Starrett Gages & Micrometer

= No. 154-F = No. 1788 = No. 437 = No. 700 = No. 124 = No. 178 A
Notes
L.S.Starrett  Machinist Tools

#219 • L.S.Starrett Machinist Tools

= Radius Gage Set No.5167MC = Center Finder Complete No.S-828H
Notes
24” Calipers

#220 • 24” Calipers

= Radius Gages
Notes
L.S.Starrett  Machinist Tools

#221 • L.S.Starrett Machinist Tools

= Gages No.187 = CrossTest Level No.134 = Center Finder And More
Notes
Dividers & Outside Calipers

#222 • Dividers & Outside Calipers

= Protractors No. 490 = Steel Rulers And More
Notes
Dividers & Rulers

#223 • Dividers & Rulers

= Taps And Files
Notes
Machinist Tools

#224 • Machinist Tools

= Magnetic Base & Indicator Set = Reamers = Taps = Gages = Micrometer
Notes
 Machinist Tools

#225 • Machinist Tools

= L.S.Starrett Contact Points = Indicator = Dividers And Punches
Notes
L.S. Starrett Level

#226 • L.S. Starrett Level

= Magnifier Visor = Radius Gages And Ruler
Notes
Cut Off Wheels

#227 • Cut Off Wheels

= 9” To 4.5”
Notes
12” Grinding Wheel

#228 • 12” Grinding Wheel

= 6” And 8”
Notes
Barnnett Multi-Meter

#229 • Barnnett Multi-Meter

= Model ME9H/U
Notes
Electric Motors

#230 • Electric Motors

= Baldor 206/230/460 Volt
Notes
Electric Motors

#231 • Electric Motors

= Hydraulic Pumps
Notes
GE Electric Motor

#232 • GE Electric Motor

= 230 Volt = 7.5 HP = Phase 1 = 1735 RPM
Notes
Induction Motor

#233 • Induction Motor

= 220/460 Volt = 20 HP
Notes
Hex Driver Set

#234 • Hex Driver Set

= Craftsman Wrenches
Notes
Welding Helmets

#235 • Welding Helmets

= Jackson = Torch Goggles
Notes
Welding Supply

#236 • Welding Supply

= Tweco Rod Holders (New) = Solderimg Gun And More
Notes
Gas Difffusers

#237 • Gas Difffusers

= Some Are New
Notes
Randor Cover Plates

#238 • Randor Cover Plates

= All New
Notes
 Machinist Tools

#239 • Machinist Tools

= Morse Tap Lathe Handles = Tin Snips = Emnco Magnetic = L.S. Starrett Calipers
Notes
Kennedy Toolbox & Taps

#240 • Kennedy Toolbox & Taps

= Includes Taps & Dies
Notes
Acetylene & Oxygen Victor Torch Gauges

#241 • Acetylene & Oxygen Victor Torch Gauges

= Smith Torch Head
Notes
Torch Gauges Smith & Victor

#242 • Torch Gauges Smith & Victor

= Torch Heads
Notes
Acetylene & Oxygen Victor Torch Gages

#243 • Acetylene & Oxygen Victor Torch Gages

= Torch
Notes
Acetylene Torch Heads

#244 • Acetylene Torch Heads

= Regulators = New Randor Welding Goggles
Notes
Acetylene & Oxygen Torch Gauges

#245 • Acetylene & Oxygen Torch Gauges

= Regulators = Vise Grips
Notes
Welding Gun Tips

#246 • Welding Gun Tips

= All Appear New
Notes
Acetylene & Oxygen Hoses

#247 • Acetylene & Oxygen Hoses

= Paint Hose = Air Hoses
Notes
Welding Supply

#248 • Welding Supply

= Leads And Rods
Notes
Welding Cable Connectors

#249 • Welding Cable Connectors

= Most Appears To Be New
Notes
Welding Rods

#250 • Welding Rods

= Most Are Sealed
Notes
Welding Rods

#251 • Welding Rods

= Stoody And Lincoln
Notes
Assorted Welding Rods

#252 • Assorted Welding Rods

= MiG Wire Conduit = Mig Guns = Grounding Clamps And More
Notes
Stainless Steel Welding Rods

#253 • Stainless Steel Welding Rods

= Lincoln & McKay
Notes
Welding Rods

#254 • Welding Rods

= Most Are Full
Notes
3’ Welding Rods

#255 • 3’ Welding Rods

= Full Tubes
Notes
Welding Rods

#256 • Welding Rods

= Most Are Full
Notes
Welding Rods

#257 • Welding Rods

= Lincoln, Fleetweld And Stoody
Notes
Welding Rods

#258 • Welding Rods

= Most Are New
Notes
Welding  Wire

#259 • Welding Wire

= Varius Sizes
Notes
Welding Rods

#260 • Welding Rods

= Most Are Full
Notes
Esab Welding Wire

#261 • Esab Welding Wire

= 33 Lbs. =.0455
Notes
Lincoln Gas Shielded Wire

#262 • Lincoln Gas Shielded Wire

= 25 Lbs. = .045
Notes
Esab Welding Wire

#263 • Esab Welding Wire

= 33 Lbs. . = .045
Notes
Welding Wire

#264 • Welding Wire

= .035 = 13 Lbs. Each
Notes
Stoody Alloy Welding Wire

#265 • Stoody Alloy Welding Wire

= 1/16” = 32 Lbs.
Notes
Linwels Welding Wire

#266 • Linwels Welding Wire

= .045 = 30 Lbs.
Notes
Linweld Welding Wire

#267 • Linweld Welding Wire

= .045 = 30 Lbs.
Notes
Pro Star Welding Wire

#268 • Pro Star Welding Wire

= .045 = 44Lbs.
Notes
Weld Arc Welding Wire

#269 • Weld Arc Welding Wire

= .045 = 45 Lbs.
Notes
Welding Wire

#270 • Welding Wire

= .045 = Most Are Full
Notes
Tin Machinist Signs

#271 • Tin Machinist Signs

= Largest Is 17” x 25”
Notes
Klein Metal Organizer

#272 • Klein Metal Organizer

= Welding Supply = Welding Rods And More
Notes
Craftsman Tool Boxes

#273 • Craftsman Tool Boxes

= Includes Contents
Notes
Wescom Dolly

#274 • Wescom Dolly

= Heavy Duty
Notes
 3 Ton Hydraulic Jack

#275 • 3 Ton Hydraulic Jack

= Sears = Working Condition
Notes
Industrial Cart

#276 • Industrial Cart

= Steel Casters = Contents Not Included = 55” x 26” W x 8” = Steel Casters
Notes
Cart

#277 • Cart

= Includes Contents
Notes
Cart W/Contents

#278 • Cart W/Contents

= 42” x 26”
Notes
All One Money

#280 • All One Money

= Rolling Cart With Contents
Notes
Cart

#281 • Cart

= Contents Included
Notes
16 Lb.Sledge Hammer

#282 • 16 Lb.Sledge Hammer

= Double Sided Axe
Notes
Yard Tools

#283 • Yard Tools

= Pole Saw = Snow Shovels = Sickles
Notes
Pitch Fork & Shovels

#284 • Pitch Fork & Shovels

= Rake
Notes
Razorback Scraper

#285 • Razorback Scraper

= Sledge Hammers
Notes
Post Hole Digger

#286 • Post Hole Digger

= Shovels
Notes
Clinton 20” Chainsaw

#287 • Clinton 20” Chainsaw

= 24” = Has Compression
Notes
Stihl Weed Trimmer

#288 • Stihl Weed Trimmer

= Model FS 120 = Has Compression
Notes
Wheelbarrow

#289 • Wheelbarrow

= Broadcaster = Loppers
Notes
Vulcan  Pipe Wrench

#290 • Vulcan Pipe Wrench

= 1” To 6” = Pipe Clamp
Notes
Pipe Benders

#291 • Pipe Benders

= 1” To 1/4”:
Notes
4’ Levels

#292 • 4’ Levels

= Axe Handles = Squares
Notes
Milwaukee Band Saw

#293 • Milwaukee Band Saw

= Includes Blades And Case = Cat. 6225 = Working Condition
Notes
14” Chop Saw

#294 • 14” Chop Saw

= Working Condition
Notes
Milwaukee 16 Ga. Shears

#295 • Milwaukee 16 Ga. Shears

= Cat. 6805
Notes
Milwaukee Grinder

#296 • Milwaukee Grinder

= A-C Only = Chisel Not Working
Notes
Milwaukee 1/2” Magnum Hole Shooter

#297 • Milwaukee 1/2” Magnum Hole Shooter

= Screwdriver Gun = Working Condition
Notes
Milwaukee 1/2” Hammer Drill

#298 • Milwaukee 1/2” Hammer Drill

= Cat. 5398 = Working Condition
Notes
Milwaukee 6” Angle Grinder

#299 • Milwaukee 6” Angle Grinder

= Cat, 5161-31 = Working Condition
Notes
Milwaukee 18 Volt Impact Driver

#300 • Milwaukee 18 Volt Impact Driver

= Includes 2 Batteries And Charger = Flashlight = Batteries Are Dead
Notes
Schmacker Battery Charger

#301 • Schmacker Battery Charger

= Speed / Maintainer = Tester = Air Compressor = Antifreeze Tester
Notes
B & D Die Grinder

#302 • B & D Die Grinder

= Model 4292 = Working Condition
Notes
Dayton Foot Pedal Switches

#303 • Dayton Foot Pedal Switches

= 5 Total
Notes
Paint Brushes

#304 • Paint Brushes

= Paint Trays = Rollers = Tape Gun And More
Notes
Gear Pullers

#305 • Gear Pullers

= Wire Strippers And More
Notes
Williams 2-9/16” Super Socket

#306 • Williams 2-9/16” Super Socket

= 12 Point = No.X-1282 = 3/4” Drive Sockets
Notes
Hartford Clamp

#307 • Hartford Clamp

= Pry Bar = Pipe Wrench And More
Notes
Assorted Clamps

#308 • Assorted Clamps

= Pins
Notes
Electrical Supply

#309 • Electrical Supply

= Klein Cutters, Nut Drivers And More
Notes
Casters

#310 • Casters

= Vibration Mounted
Notes
Tool Assortment

#311 • Tool Assortment

= Pop Rivet Gun And More
Notes
Funnels

#312 • Funnels

= Various Sizes
Notes
Chevrolet 1500 Truck Door

#313 • Chevrolet 1500 Truck Door

= No Window Or Door Panel = Has Scuffs And Scratches
Notes
Old Chevrolet Tailgate

#314 • Old Chevrolet Tailgate

= 51” x 15”
Notes
Gas Tank

#315 • Gas Tank

= Used Fuel Pump
Notes
Chevy Truck Seats

#316 • Chevy Truck Seats

= Shows Wear
Notes
Chevy Fenders

#317 • Chevy Fenders

= Floor Pans
Notes
Auto Parts

#318 • Auto Parts

= Starter = Bearings = Air Compressor Regulators And More
Notes
Radiator Hoses And More

#319 • Radiator Hoses And More

= Concrete Bags
Notes
Old Truck Hub Caps

#320 • Old Truck Hub Caps

= Chevy And Ford
Notes
Set Of Michelin Tires(5)

#321 • Set Of Michelin Tires(5)

= 235/80 R22
Notes
Titan Tractor Wheels & Tires

#322 • Titan Tractor Wheels & Tires

= 9.5L-15 SL
Notes
Galaxy Tractor Wheels & Tires

#323 • Galaxy Tractor Wheels & Tires

= 6.00-16 F-2
Notes
Goodyear Wheels

#324 • Goodyear Wheels

= 10 R 22.5 = 3 Wheels And Tires
Notes
BF Goodrich & Michelin Tires

#325 • BF Goodrich & Michelin Tires

= 245/175/R16 = 215/70R15
Notes
BF Goodrich All Terrain & Goodyear Tires

#326 • BF Goodrich All Terrain & Goodyear Tires

= 285/75R16 = 265/65R18
Notes
New Trailer Lights And Wires

#327 • New Trailer Lights And Wires

= Muffler
Notes
Tractor Lights

#328 • Tractor Lights

= Various Styles
Notes
Oliver Tractor Parts

#329 • Oliver Tractor Parts

= Grill = Carburetors = Battery Mount And More
Notes
Tractor Parts

#330 • Tractor Parts

= Carburetors, Lights, Starter, Filters And More
Notes
Tractor Parts

#331 • Tractor Parts

= Muffler Stack = Manifold = Carb And More
Notes
Oliver Fan Belt Drive

#332 • Oliver Fan Belt Drive

= Unknown Condition
Notes
Trailer Harness

#333 • Trailer Harness

= Trailer Llghts
Notes
Trailer Lights And Hook Ups

#334 • Trailer Lights And Hook Ups

= Long Jack = Files = Wires And Kit
Notes
Torch Regulators And Gauges

#335 • Torch Regulators And Gauges

= Vise Grips And Files
Notes
Chainsaw Blades

#336 • Chainsaw Blades

= 18” To 24”
Notes
Old Metal Light Covers

#337 • Old Metal Light Covers

= All Thread And More
Notes
Sharpe Paint Guns

#338 • Sharpe Paint Guns

= 3 Triggers
Notes
Hammer Heads

#339 • Hammer Heads

= Oil Cans And Drill Bits
Notes
Blacksmith Tools

#340 • Blacksmith Tools

= H & M Spring Loaded Wood Trays
Notes
Welding Helmets And Gloves

#341 • Welding Helmets And Gloves

= Torch Goggles
Notes
Tool Assortment

#342 • Tool Assortment

= Digital Protractor = Cut Off Wheels And More
Notes
Copper Wire

#343 • Copper Wire

= Copper Tube
Notes
Tarps And Light

#344 • Tarps And Light

= Circular Saw
Notes
Wood Crate

#345 • Wood Crate

= Heavy Duty = 20” L x 20” W x 18” T
Notes
Body Harnesses

#346 • Body Harnesses

= Heavy Gauge Wire
Notes
All One Money

#347 • All One Money

= Scrap Steel
Notes
Fairbanks-Morse Portable Platform Scale

#348 • Fairbanks-Morse Portable Platform Scale

= 1000Lb. Max = Model 1124A
Notes
Saw Sharpener

#349 • Saw Sharpener

= Not Tested
Notes
Creepers

#350 • Creepers

= Good Shape
Notes
IBeams

#351 • IBeams

= 1/4” Thick 30” Long = 4 Pieces = Steel Stock
Notes
Garage Door Drive

#352 • Garage Door Drive

= Not Tested
Notes
12’ Boards (2)

#353 • 12’ Boards (2)

= 9” Wide
Notes
Steel Pipes

#354 • Steel Pipes

= 3' 5' Tall = 5" Diameter
Notes
Copper Tube

#355 • Copper Tube

= 5 Pieces = 20' Long = 34" Diameter
Notes
Heavy Cast Iron Base

#356 • Heavy Cast Iron Base

= 36” Tall = 21” Diameter
Notes
Cast Iron Base

#357 • Cast Iron Base

= 30” L x 28” W x 36” T = Very Heavy
Notes
Empty Fire Extinguishers

#358 • Empty Fire Extinguishers

= Metal 5 Gallon Gas Tank
Notes
Fire Extinguishers

#359 • Fire Extinguishers

= Tank Caps
Notes
Safety Cones

#360 • Safety Cones

= 9 Cones = Various Sizes
Notes
30 Gallon Mobile Grease Pump

#361 • 30 Gallon Mobile Grease Pump

= Absorbent = 4 Barrels Total
Notes
Cast Iron Pan And Propane Burner

#362 • Cast Iron Pan And Propane Burner

= Water Pitcher And Basket
Notes
Cable & Extension Cords

#363 • Cable & Extension Cords

= Chokers = Milwaukee Replacement Cord
Notes
All One Money

#364 • All One Money

= Nuts And Bolts = Large Lot
Notes
Hardware

#365 • Hardware

= Carriage Bolts, Washers & Nuts
Notes
15W-40 Engine Oil

#366 • 15W-40 Engine Oil

= Wix Filters = Nuts And Bolts = Florescent Bulbs And More
Notes
All One Money

#367 • All One Money

= Nuts And Bolts = Tap Cons = Werlding Leads And Much More
Notes
Scrap Iron

#368 • Scrap Iron

= 6’ Tall
Notes
Axle w/ Hubs

#369 • Axle w/ Hubs

= 8 Studs = 7’ Between Hubs
Notes
Scrap Iron

#370 • Scrap Iron

= Includes Pallet = Very Heavy
Notes
Steel Scrap

#371 • Steel Scrap

= Heavy Pieces = All Thread
Notes
Scrap Pile

#372 • Scrap Pile

= Copper, Aluminum And Steel
Notes
Brass Scrap Lot

#373 • Brass Scrap Lot

= Heavy Brass = Includes Sheet Of Brass
Notes
Steel Scap Pile

#374 • Steel Scap Pile

= Pipe = Steel Plates
Notes
Gaylord Box

#375 • Gaylord Box

= 30” L x 30” W x 33” T = Contents Included Scrap Metal
Notes
Steel Wheels

#376 • Steel Wheels

= Over 30 Wheels And 8 Tires
Notes
All  One Money

#377 • All One Money

= Incudes Everything On The Shelves
Notes
Carhartt Bibs

#378 • Carhartt Bibs

= Size 38 x 30 = Dickies Coat And Bibs 36x34
Notes
Doors (5)

#379 • Doors (5)

= Largest One Is 82" x 35" = Believe Are Interior Doors
Notes

For more information, call:
(816)935-7439

Also Visit: Auctioneer's Website
Questions about this auction? Phone 816-935-7439 or email our office at [email protected].

Website by GranDesign, LLC, P.O. Box 42, 402 E Evergreen, Cameron, MO 64429. If online display fails, call 660.663.2154. All Rights Reserved. ©2024